artec_logo artec_iconhome artec_iconmail

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Tips caring for DVD Player is not easily damaged

  • Make sure the power cable is connected to the LCD, and also cable VGA / RGB to the LCD has been connected before you connect the LCD power cable into an electric switch.

  • Do not move or lift the LCD Pls the LCD is in use. Because the LCD backlight is very sensitive and can cause your LCD lights off.

  • If an electric current is interrupted, due to power outages Perhaps or other Causes, unplug the power cable from the LCD power switch. Pls put back an electric current is stable again.

  • Don’t off by unplugging the power cord from the electrical switches.

LCD turned off, wait until the indicator light is green or cooling fan, and then in the elevator Pls the LCD has cold conditions.