artec_logo artec_iconhome artec_iconmail

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

artec_slogan
artec_homeartec_productartec_creativeartec_portfolioartec_locationartec_careerartec_tipsartec_contact
 
Tips Caring Printer

If not treated, the printer could be 'cranky' and the performance will be not optimal. For this reason, the printer also needs to be treated like any other electronic devices to remain in good condition.

Here are some tips on how to maintain the printer is easily and cheaply, and paid, your printer is good condition and able to work more optimally.

1. Use the periodic printer
To prevent poor print quality, use your printer on a periodic basis at least 2-3 times a week. This will make the flow of ink from the hole remains smooth. If you rarely use the printer, including, perhaps you need a piece of paper to remind you print with black ink or white color at least 2 times a week to maintain the smooth flow of ink.

2. Turn off the printer if not used
Do not forget to always turn off the printer when not in use. This will prevent the closing holes of the flow of ink in the printer head.

3. Clean the dirt in the printer
Clean the inside of the printer every one or two weeks, depending on how often and how much you use the printer. This will keep your printer's capabilities in printing. Do not forget to observe whether there are objects left in the printer such as paper clips and so on. Do not store the printer in a dusty or full of place. If it is a dusty place, it's good printer with plastic wrap to protect it from dirt.

4. Ensure cartridges in good condition when replacing Ink
Printer cartridge filled with delicate electronic ink. These liquid may be damaged if treated carelessly. This could be a signal to the computer to be broken or bad print result. Therefore, treat cartridge carefully.

5. Use diagnostic tools
All the printers have the troubleshooting menu that help on how to treat or deal with problems on the printer. Take time to learn. Perhaps the information provided can help you overcome problems in your printer.

6. Turn off the printer if failed to print
Failure in print or error message that sometimes appears, sometimes can be solved by turning off the printer, then remove the power cord for at least ten minutes. After that, insert the power cord on power connector , turn on the printer and try printing again. This way are often able to overcome the failure to print properly.

Artec_Footer